EC15X Three Phase CT Operated Electricity Meter
Three Phase Electricity Meter with External Current Transformer Connection
|
Technicial Specifications |
Parameters |
|---|---|
|
Connection type |
3 phase 4 wire |
|
Terminal Connection |
DIN |
|
Accuracy Class |
Class B (TS EN 50470-1/3) |
|
Application Voltage Range |
-20% .. +15% Un (Un = 230 V) |
|
Frequency |
50 Hz |
|
Meter Constant |
2000 imp/kWh |
|
Nominal Akım, In |
5A |
|
Maximum Current, Imax |
6A |
|
Starting Current, Ist |
15 mA |
|
Display |
LCD 9 digit + symbols |
|
Optical Port |
Read/Write (TS EN 62056-21) |
|
Weight |
0.8 kg |
| Model | A | B | C | D |
|---|---|---|---|---|
| EC15XTBW | 160 | 230 | 67 | 51 |
Features
- MID Certified
- IEC 50470-1/3 compliance with standards
- Class B (+1 %) active energy metering accuracy
- UV-protected, Polycarbonate IP54 body
- Wide Working Range 150V - 320V
Maximum 100A for EC1 maximum 80A for EC0 Outdoor, -40C... +70C - 4 tariffs, 8 time zones, 3 day type, TOU
- 0.5 sec/day real time clock accuracy
- Automatic Daylight Saving Application (DST)
- Optical Port (EN62056-21/61)
- Index reading from display during absence for power
- Data reading from optical port during absence of power
- Compliance with TEDAŞ/EPDK Conditions
- Custom LCD design
- Ergonomic and lightweight design
- 10 Years of battery life
Innovations
- 5A basic current
- Backlight Display
- 30 days / 30 min Load Profile
- Monthly demand monitoring
- Current and voltage monitoring
Protection Features
- Terminal cover open detection
- Top cover open detection
- Independent sealing for terminal and top cover
- Password protection for programming mod
- Absolute energy value recording when reverse connected
- Protection against memory manipulation
- Previous months values
- Last 24 months tariff consumption recording
System Solutions
- Optical port conformity to IEC standards
- RS485 port (optional)
- Optional MODBUS support
- Optional DLMS/COSEM support
Accurate Metering
Our meters have electronic metering(solid state) structure which enables long term high metering accuracy service life. Self consumption is below standart values and all the components are chosen and tested carefully. Reference and basic current values are chosen as 5 A to increase the accuracy.
Our meters perform very accurately on direct connected mode from starting current 100 A, current transformer connected mode up ot 10 A because dynamic range of metering circuits are wide. Even the current ends are connected reversely metering accuracy is in the same values and consumption is recorded as absolute value.
Easy Installation and Stylish Industrial Design
Our electricity meters have small and esthetic design which can easily be installed instead of mechanical meters uninstalled from site. Industrial design is performed by taking long term high performance usage, easy installation and usage and future-proof properties into consideration.
Environmental Friendly
All the precautions for protecting and improving the environment are taken and been applied. From battery decision to package design, at all stages this precision is applied. Our company proved this structure by ISO 140001 Environment Management System certificate.
Special Design Display
Meter display is specially designed large for easy reading. Display messages are supported by symbols for better understanding. Display backlight is standard for combi meters and optional for domestic type meters.
Remote Reading
In the near future all meters will be read remotely. For remote reading, meters should be equiped with communication module. Most common and economical of these module is RS485. For this reason, Combi meters used by high consuming customers have RS485 output as a standart feature. For domestic mono phase and three phase meter RS485 module is optional.
